- Commercial
- Salon
Hair Salon Floor Plan Template
- m²
- 150
- Stations
- 8
A salon with eight barber stations on one open floor — four along the back wall, two on a side wall and a double-sided unit near the door — and a washing area with two backwash basins beside them. Reception and a waiting area with sofas sit by the entrance, with a staff room and two WCs behind. The drawing has no treatment rooms or colour bar, and some labels are misspelled.
Downloading and sharing are not available yet. Adapting this layout means describing it to the AI generator, which spends credits.
Room breakdown
Room areas are net of wall thickness and circulation, so they add up to less than the stated total. Use these figures as the baseline when you describe changes to the generator.
| Room | Dimensions | Features |
|---|---|---|
| Styling Floor | About 10.7 × 8.5 m (90.9 m²) | Eight barber stations: four on the back wall, two on a side wall and a double-sided unit |
| Wash & Backwash Bay | About 3.0 × 4.5 m (13.5 m²) | Backwash basins, reclining chairs |
| Reception & Waiting | About 7.1 × 4.0 m (28.4 m²) | Reception desk, sofas and an armchair, main entrance |
| Staff Room | About 3.1 × 2.0 m (6.2 m²) | Table for two, sink and fridge |
| WCs | About 2.6 × 1.6 m (4.2 m²) | Two toilets and a basin |
Key specifications
- Total Area
- About 150 m² (1,615 sq ft), single level
- Stations
- 8 barber stations on one open floor
- Wet Areas
- Washing area with two backwash basins beside the styling floor
- Support Spaces
- Reception desk, waiting area, staff room and two WCs
Common modifications
Three changes this layout takes well, with the area each one moves around.
Add four more styling stations
Two more double-sided units in the middle of the styling floor would add four stations, though the walk to the washing area would tighten.
Add a colour bar
A small mixing bench with a sink and product storage fits against the wall beside the washing area, keeping colour products away from the stations.
Add a nail bar
A 15 m² run along the waiting-area wall takes four nail stations with extraction, adding a service line without touching the styling floor.
How to customise this template
Pick the closest layout
Compare room lists, total area and plot width across the library, and choose the template nearest to your plot, unit or lease outline.
Note your changes
Write down what should change — rooms to add, resize or remove — in words you can give the generator, using the approximate room breakdown on this page as a guide.
Generate a new version
Describe the adapted layout to the AI floor plan generator, or upload a plan image to the floor plan editor and describe the edit. Each run spends credits.
Review before you build
Results are planning images, not permit-ready drawings. Export to DXF, PDF and PNG is planned but not live yet.



